Precision metal parts processing refers to the processing of some metal parts with small diameters. The materials and design drawings for precision metal parts processing are more important. Therefore, some matters need to be paid attention to when processing precision metal parts, otherwise it may be possible Will lead to product scrapping, etc., so what should be paid attention to when processing precision hardware parts?

Matters needing attention when processing precision metal parts:

1. Precision hardware parts processing is to process some small diameter hardware parts. Therefore, the design drawings of this product must be accurate, with as few parts as possible. If the drawings are inaccurate, the produced parts may be unusable, thereby increasing production costs.

2. In the process of precision hardware processing, the operator should maintain the correct posture and have enough energy to cope with the work. During the operation, the operator must concentrate, chatting and cooperation are strictly prohibited. Operators are not allowed to operate in a state of irritability and fatigue.

3. Before mechanical action, first check whether the moving parts are filled with lubricating oil, then start and check whether the clutch and brake are normal, and idling for 1-3 minutes. Operation is strictly prohibited when the machine fails.

4. When turning on the power to start the machine, you must wait for other people to leave the working area of ​​the machine and take away the debris on the workbench before starting the machine.

5 When the machine is working, it is forbidden to reach into the working area of ​​the slider, and it is forbidden to pick and place the workpiece by hand. When placing the workpiece in the mold, standard tools must be used. If there is abnormal noise or machine failure, immediately turn off the power switch for inspection.